EWC Controls ND Series 12X10 ND Rectangular Motorized Damper, 12" x 10" Opening Size, Rectangular, 24 VAC, Slip-In, Side/Bottom Mount (Motor), 1.5 In. Wc. Pressure Rating, Power Open/Power Close, Non-Spring Return, 18 in-lb
EWC Controls ND Series 12X10 ND Rectangular Motorized Damper, 12" x 10" Opening Size, Rectangular, 24 VAC, Slip-In, Side/Bottom Mount (Motor), 1.5 In. Wc. Pressure Rating, Power Open/Power Close, Non-Spring Return, 18 in-lb
| Amperage Rating | : | 1.50 A |
| Material | : | Extruded Aluminum (Frame/Blades), Nylon (Bearings) |
| Voltage Rating | : | 24 V |
The ND Damper is constructed using Heavy Duty 0.80†extruded aluminum. Nylon Bearings for quiet operation. Overlapping parallel blade design. Reliable operation up to 1.5â€wc and 1500FPM duct velocities. The UL Listed Motor Actuator. 24vac 3 wire power open/power close or floating function. The motor actuator is rated at 18â€lbs. of torque. Superior to low torque Spring type motors. The Motor Actuator housing is rated NEMA1. Integrated End-Stop Adjustment allows a percentage of Relief Air (Leakage) when the damper is powered closed. You may set a maximum open position as well, which is useful during test and balancing procedures. Bright green and red LED's Indicate damper open and closed position.
EWC Controls Rectangular Motorized Damper, Model: ND Series, 12" x 10" Opening Size, Rectangular, 24 VAC, Slip-In, Side/Bottom Mount (Motor), 1.5 In. Wc. Pressure Rating, Power Open/Power Close, Non-Spring Return, 18 in-lb, 40 Seconds Timing Range, 24 VAC, 3-Wire Power Open/Power Close (Floating Function), 18 in-lb Torque, NEMA 1 Housing, UL Listed, 12" H x 10" W x 4" D Dimensions, Quick Connecting Terminal Block, 3-Wire Electrical Connection, Extruded Aluminum (Frame/Blades), Nylon (Bearings), UL Listed (Motor Actuator), NEMA 1 (Motor Housing), Mill Finish (Extruded Aluminum), Silver, Overlapping Parallel, 1,500 FPM, 1.5 A, 185 °F (Maximum, Operating), 50 Hz, 60 Hz, 1 Phase, Domestic
- Constructed with a heavy-duty 0.80" extruded aluminum frame and overlapping parallel blades for low leakage.
- Features nylon bearings for quiet, maintenance-free operation.
- Equipped with a UL Listed, 24 VAC, 3-wire motor actuator (power open/power close) providing 18 in-lb of torque.
- Operates reliably in systems with static pressure up to 1.5 in. wc and duct velocities up to 1500 FPM.
- Integrated end-stop adjustments allow setting minimum closed and maximum open positions for balancing.
- Bright green and red LEDs provide visual confirmation of damper open/closed status.
- Simple 3-wire connection via an integrated terminal block.
- Made in the USA.