TRANE® Precedent™ YSC Series YSC060G3EMB0000 Rooftop Gas/Electric Packaged Unit, 60000 Btu/hr Input, 208 - 230 V, 15.9 A

TRANE® Precedent™ Rooftop Gas/Electric Packaged Unit, Series: YSC Series, Input BTU Rating: 60000 Btu/hr, Output BTU Rating: 81000 Btu/hr, 208 - 230 V, 15.9 A, 4.88 kW Wattage, 0.4 hp Outdoor Fan, 1-1/2 hp Indoor Fan, 4.3 hp Compressor, 1100 rpm Outdoor Fan, 3500 rpm Compressor Rotational Speed, 60 Hz, 3 ph Phase, Scroll Compressor, Convertible, 3950 cfm, 12 EER Rating, 14 SEER, Tonnage: 5 ton, 3 Burners, 2 Stages, R-410A Refrigerant, 81 dBA Decibel, Roof Curb Mounting, Direct Spark Ignition, Direct Drive, Blower Size: 22 in Dia, 1 Row, 23 FPI, 11.9 sq-ft Face Area Outdoor, 2 Rows, 16 FPI, 8.15 sq-ft Face Area Outdoor Coil, 1/2 in Gas Pipe Connection, 1-3/4 in NPT Drain Connection, (2) 20 x 35 x 2 in Filter, 40 A Fuse Rating, 81 % Steady State Efficiency, Steel, Finish: Zinc-Coated, 0 to 115 deg F, 69-7/8 in L x 44-1/4 in W x 40-7/8 in H, Additional Information: Electromechanical Unit Control, Second Sequence Minor Design

• Anti-Short Cycle Timer - Provides a 3 minute minimum "ON" time and 3 minute "OFF" time for compressors to enhance compressor reliability by assuring proper oil return
• Colored And Numbered Wiring - Save time and money tracing wires and diagnosing the unit
• Compressors - Precedent™ contains the best compressor technology available to achieve the highest possible performance. Dual compressors are outstanding for humidity control, light load cooling conditions and system back-up applications. Dual compressors are available on 6 to 10 tons models and allow for efficient cooling utilizing 3-stages of compressor operation (high efficiency models only)
• Condenser Coil - Precedent™ boasts a patent-pending 1+1+1 condenser coil, permanently gapped for easy cleaning
• Controls - ReliaTel™ or Electromechanical - ReliaTel™ microprocessor controls provide unit control for heating, cooling and ventilating utilizing input from sensors that measure indoor and outdoor temperature and other zone sensors. ReliaTel™ also provides outputs for building automation systems and expanded diagnostics
• Convertible Units - Units ship in a downflow configuration and can be easily converted to horizontal by simply moving two panels
• Crankcase Heaters - These band heaters provide improved compressor reliability by warming the oil to prevent migration during off-cycles or low ambient conditions
• Direct Drive Motors - For additional static requirements, single-phase units offer multi-speed, direct drive motors. All 10 ton units and 6 to 8.5 ton high efficiency units offer variable speed direct drive motors
• Drain Pan - Every Precedent™ unit has a plastic, removable, dual-sloped drain pan (IAQ) that's easy to clean and reversible to allow installation of drain trap on either side of the unit
• Foil Faced and Edge Captured Insulation - All panels in the evaporator section of the unit have cleanable foil-faced insulation. All edges are either captured or sealed to ensure no insulation fibers get into the airstream
• Heat Exchanger - The compact cabinet features a progressive tubular heat exchanger in low, medium and high heat capacities. The heat exchanger is fabricated using corrosion resistant aluminized steel tubes and burners as standard on all models. It has an induced draft blower to pull the gas mixture through the burner tubes. The heater has a direct spark ignition system which doubles as a safety device to prove the flame
• Low Ambient Cooling - All Precedent™ microprocessor units have cooling capabilities down to 0 degF as standard. Electromechanical models have cooling capabilities to 40 degF as built, or to 0 degF by adding the optional low ambient control (Frostat™)
• Low Voltage Connections - The wiring of the low voltage connections to the unit and the zone sensors is as simple as 1-1, 2-2, and 3-3. This simplified system makes it easy for the installer to wire
• Microchannel Condenser Coil - Microchannel condensing coils are all-aluminum coils with fully-brazed construction. This design reduces risk of leaks and provides increased coil rigidity - making them more rugged on the jobsite. Their flat streamlined tubes with small ports and metallurgical tube-to-fin bond allow for exceptional heat transfer
• Phase Monitoring Protection - Precedent™ units with 3-phase power are equipped with phase monitoring protection as standard. These devices protect motors and compressors against problems caused by phase loss, phase imbalance and phase reversal indication
• Quick Access Panels - Remove two screws for access to the standardized internal components and wiring
• Standardized Components - Components are placed in the same location on all units. Due to standardized components throughout the line, contractors/owners can stock fewer parts
• Through-the-Base Condensate - Every unit includes provisions for through-the-base condensate drain connections. This allows the drain to be connected through the roof curb instead of a roof penetration

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/TRANE_YSC036G3EMB0000_Catalog.pdf