TRANE® Precedent™ TSJ Series TSJ090A3S000000 Cooling/Electric Heat Air Conditioner Packaged Unit, 7.5 ton Nominal

TRANE® Precedent™ Cooling/Electric Heat Air Conditioner Packaged Unit, Series: TSJ Series, 7.5 ton Nominal Capacity, 91000 Btu/hr Cooling Capacity, 91000 Btu/hr Cooling, 208 - 230 V, 8.18 kW Wattage, 0.7 hp Outdoor Fan, 3 hp Indoor Fan, 1100 rpm Outdoor Fan, 1850 rpm Indoor Fan Rotational Speed, 60 Hz, 3 ph Phase, Manifolded Scroll Compressor, Full Face, 2475 cfm, 14.8 IEER, 11.2 EER Rating, 1 Speed, 1 Stages, R-410A Refrigerant, 86 dBA Sound Level, Rooftop Mounting, Direct Drive, 1 Row, 23 FPI, 21.64 sq-ft Face Area Outdoor, 2 Rows, 18 FPI, 11.84 sq-ft Face Area Indoor Coil, 3/4 in NPT Drain Connection, (2) 18 x 24 x 2 in, (3) 24 x 16 x 2 in Filter, 50 A Fuse Rating, Symbio™ 700 Control, Steel, Finish: Galvanized/Zinc-Plated, 40 to 125 deg F, 88-1/8 in L x 53-1/4 x 50-7/8 in H, Additional Information: Standard Efficiency, DX Cooling

• Airflow Distribution - Airflow is outstanding. Precedent™ can replace an older machine with old ductwork and, in many cases, improve the comfort through better air distribution
• Cabinet Integrity - For added water integrity, Precedent™ has a raised 1 inch lip around the supply and return of the downflow units to prevent water from blowing into the ductwork
• Coil Guards - Coil guards protect condenser coil during shipping as well as hail, vandals, wind, etc. Toolless design lends itself to ease of maintenance in cleaning coils
• CO2 Sensor - Demand Control Ventilation (DCV) - Demand-controlled ventilation (DCV) is a control strategy that responds to the actual demand (need) for ventilation by regulating the rate at which the HVAC system brings outdoor air into the building. A CO2 sensor measures the concentration (parts per million, ppm) of CO2 (carbon dioxide) in the air. As the CO2 concentration changes, the outside air damper modulates to meet the current ventilation needs of the zone. The CO2 sensor kit is available as a field installed accessory and wires directly to the Symbio 700 controller
• CompleteCoat™ Condenser Coil - This optional coated coil provides excellent corrosion resistance as well as uniformity of coverage and coating thickness
• Convertible Units - Units ship in a downflow configuration and can be easily converted to horizontal by simply removing two panels. Optional field accessory kits required for 15 to 25 ton units
• Direct Drive Plenum Fans - All 6 to 25 tons units are equipped with a direct drive plenum fan design with the following features, Backward-curved fan wheel, External rotor direct drive variable speed indoor motor, Variable speed adjustment available in Symbio controller, Designed to slide out for ease of maintenanc
• Drain Pan - Every Precedent™ unit has an easy-to-clean, composite removable dual-sloped drain pan (IAQ). On units with B or C (6 to 12.5T) size cabinets, the drain pan is reversible, allowing installation of the draining trap on either side of the unit
• Fault Detection and Diagnostics (FDD) - This offering meets the mandatory requirement of CA Title 24 of fully configurable diagnostics allowing fault history and reading fault codes at the unit via Symbio™ 700 board or app. This feature provides detection of the following faults: Air temperature sensor failure/fault and notification of acceptable economizer mode. The FDD system shall be certified by the Energy Commission as meeting the requirements
• Flexibility - Precedent™ offers ultimate flexibility. Units are built to order in our standard ship cycle time
• High Efficiency Filtration - Precedent™ units offer a variety of high efficiency filtration options. MERV 8 and MERV 13 filters provide additional filtration beyond the capabilities of typical 2 inches throwaway filters
• High Static Motor - Available on 10 and25 ton models, this high static motor option extends beyond the capability of the standard motor
• Hinged Access Doors - These doors permit easy access to the filter, fan and compressor/control sections. They reduce the potential roof damage from screws or sharp access door corners
• Humidity Control (HGRH) - All 12.5 to 25 tons Precedent units can be ordered with a factory installed modulating humidity control system designed to provide year around comfort by improving indoor air quality while controlling humidity levels
• Humidity Sensor/Humidistat - The humidity sensor/humidistat, when used in conjunction with our dehumidification (hot gas reheat) units will provide outstanding humidity control and comfort. Humidity sensors can be wall or duct mounted. The humidity deadband can be set between 40% and 60% relative humidity
• Low Ambient Cooling - All Precedent™ units have cooling capabilities down to 40 degF. Field installed accessory extends operation down to 0 degF
• Multi-Speed Indoor Fan System - This system incorporates a multi-speed fan control to change the speed of the fan to 66% of full airflow based off of compressor stages
• Quick Adapt Curbs - Enables easy upgrade of existing Voyager™ 6 to 25 tons units to Precedent™ units on replacement jobs
• Through-the-Base Condensate - 6 to 12.5 tons unit includes provisions for through-the-base condensate drain connections. This allows the drain to be connected through the roof curb instead of a roof penetration

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/TRANE_TSJ120A4S000000_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/TRANE_TSJ120A4S000000_Instruction_Installation_Manual.pdf