DiversiTech® SPIN® F6000 6-Piece Flaring Tool Set, For Tube Size: 1/4 in, 3/8 in, 1/2 in, 5/8 in, 3/4 in, 7/8 in
DiversiTech® SPIN® F6000 6-Piece Flaring Tool Set, For Tube Size: 1/4 in, 3/8 in, 1/2 in, 5/8 in, 3/4 in, 7/8 in
| Applicable Materials | : | Brass, Soft Copper |
| Flare Angle | : | 45 deg |
| Flare Type | : | Single |
| For Tube Size | : | 1/4 in, 3/8 in, 1/2 in, 5/8 in, 3/4 in, 7/8 in |
| Package Quantity | : | 8 Pack |
| Packaged Depth | : | 4.8 in |
| Packaged Height | : | 9 in |
| Packaged Width | : | 8.6 in |
| Product Family | : | SPIN® |
| Product Type | : | Flaring Tool Set |
| Shipping Weight | : | 1.3 lb |
The SPIN® tools F6000 Flaring Tool Set is a 6-piece Flaring set that is developed for soft copper or aluminum tubing only. Recommended use with corded or cordless drills that are 1,800 RPM or faster. The tools keep the tubing thickness for high pressure refrigerants and is perfect for mini splits and ductless A/C units. The F6000 Flaring Tool Set has the following bits to perfectly flare tubes with the O.D. of 1/4", 3/8", 1/2", 5/8", 3/4" and 7/8".
DiversiTech® 6-Piece Flaring Tool Set, Product Family: SPIN®, For Tube Size: 1/4 in, 3/8 in, 1/2 in, 5/8 in, 3/4 in, 7/8 in, Applicable Materials: Brass, Soft Copper, 45 deg Flare Angle, Single Flare
- 6-piece Flaring set that is developed for soft copper or aluminum tubing only
- Heat by Friction; Preserves copper's malleability during the molding process, for a leak-tight fitting
- Maintains the tubing thickness for high pressure refrigerants and is perfect for mini splits and ductless A/C units
- NOT to be used with impact guns or with drills or screwdrivers with hammer or impact mode on. This will result in a swage or flare that does not seal properly