Airguard® DP® 0422203 High-Capacity Filter, Die-Cut Panel, Pleated Filter, 8 MERV, 20 in Length, 20 in Width, 1400 cfm
Airguard® DP® 0422203 High-Capacity Filter, Die-Cut Panel, Pleated Filter, 8 MERV, 20 in Length, 20 in Width, 1400 cfm
| CFM Airflow | : | 1400 cfm |
| Color | : | White |
| Disposable | : | Yes |
| Filter Material | : | Steel/Synthetic |
| Filter Type | : | Die-Cut Panel, Pleated |
| Final Resistance | : | 1 in-WG |
| Frame Material | : | Beverage Board |
| Function Type | : | Filter |
| Initial Resistance | : | 0.2 in-WG |
| Length | : | 20 in |
| MERV | : | 8 |
| Micron Rating | : | 3 to 10 um |
| Product Family | : | DP® |
| Thickness | : | 2 in |
| Width | : | 20 in |
DP® high-capacity extended surface, pleated air filters offer low pressure drop and high dust-holding capacity. They are suitable for use in virtually any air handling system, particularly those that require high performance, durability, and extended service life. This includes filter banks, central station air handlers, rooftop units, side access housings, as final filters for systems with MERV 10 or MERV-A 8-A requirements or pre-filters in multi-stage systems. The filter design utilizes a consistent pleat shape on predetermined centers, allowing dirt to collect evenly over the entire surface of the media. The two-piece frame provides rigidity with double-wall thickness around the outer edge. The filter also features a die-cut pattern, which results in 50% more contact points between the media pack and the frame. 100% thermally bonded synthetic, proprietary media provides extra protection against damage from moisture, delaminating, excessive buckling, collapsing, warping, and bending, which can often cause alternative filter products to prematurely fail. All DP filters exceed ASHRAE Standard 52.2 air cleaning specifications for filters installed upstream of cooling coils. Filters may be installed with the pleats either vertical (preferred) or horizontal.
Airguard® High-Capacity Filter, Die-Cut Panel, Pleated Filter, 8 MERV, 20 in Length, 20 in Width, 2 in Thickness, Steel/Synthetic Filter, 1400 cfm, 0.2 in-WG Initial Resistance, 1 in-WG Final Resistance, 3 to 10 um Micron Rating, Disposable: Yes, Beverage Board Frame, Product Family: DP®, Filter Function Type, White
- Exceeds American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 52.2 air cleaning specifications for filters installed upstream of cooling coils
- 100% thermally bonded synthetic, proprietary media resists moisture, delaminating, excessive buckling, collapsing, warping, and bending
- Low initial resistance facilitates efficiency and energy savings
- Resistant to mold and microbial growth
- Performs to MERV 10 and MERV-A 8-A before and after a conditioning step
- Filtration efficiency: MERV 10, MERV-A 8-A
- Nominal thickness (in.): 1, 2, 4
- Rated air velocity (fpm): 300-625
- Initial resistances (in.w.g.): 0.14-0.20
- Final resistance (in.w.g.): 1.0
- Maximum operating temperatures: 225 deg F (107 deg C)
- Material of construction: Heavy-duty, moisture-resistant beverage board frame; rust-resistant, expanded metal support grid made of galvanized steel
- Classified per UL Standard 900 for flammability